Automatic saw  TRV 1700 - C2890

Numerical control pusher with defect reader and cutting optimization
The defect is detected by a camera which identifies a mark made with fluorescent chalk
Pusher carriage with advancement speed 60/230 m/min with Brushless motor
Useful stroke from 500 mm to 6100 mm
Group of 6 chains for the loading and the approach of the boards
Pneumatic lifting
Capacity 50 kg per meter
Variable distance between centres, length of chains 1200 mm

Automatic crosscut saw TRV1700 P 500
Vertical pneumatic press
Advancement from right to left
Cutting time adjustable from 0.1 to 1 s
Thickness of boards min 10 mm, max 120 mm
Board width min 30 mm, max 300 mm
Blade motor HP 5.5 and automatic braking

Discharge belt
Pneumatic ejector selector
Max weight of the board 15 kg
Length of the piece to be ejected min 200 mm, max 500 mm

Numerical control sorting belt
With NC ejector
Fixed speed 50m/min

Chain transfer inclined discharge/side load
Inclination max 15° (= height 120 mm, length 1000 mm)
Center distance 2500 mm, chain length 1600 mm

Discharge belt
Motor 0.5 HP
Fixed speed 50 m/min
Length 3000 mm x depth 400 mm x height 900 mm

Conveyor belt for the discharge of inclined cuts
45° inclined waste discharge belt with blind h 40 mm, pitch 300 mm
Speed 8m/min
Lifting height from 500 mm to 1900 mm

Data transmission to PC
Transmission mode via USB stick, RS232 cable